dmesg - bios set numa + perf mode
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1 (2015-05-24)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000947ff] usable
BIOS-e820: [mem 0x0000000000094800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000defa57ff] usable
BIOS-e820: [mem 0x00000000defa5800-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000181fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Hewlett-Packard HP Z800 Workstation/0AECh, BIOS 786G5 v03.57 07/15/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x1820000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask FFE0000000 uncachable
1 base 1820000000 mask FFE0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xdefa5 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [ffff8800000f9bf0]
Base memory trampoline at [ffff88000008e000] 8e000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01af4000, 0x01af4fff] PGTABLE
BRK [0x01af5000, 0x01af5fff] PGTABLE
BRK [0x01af6000, 0x01af6fff] PGTABLE
init_memory_mapping: [mem 0x181fe00000-0x181fffffff]
[mem 0x181fe00000-0x181fffffff] page 2M
BRK [0x01af7000, 0x01af7fff] PGTABLE
init_memory_mapping: [mem 0x181c000000-0x181fdfffff]
[mem 0x181c000000-0x181fdfffff] page 2M
init_memory_mapping: [mem 0x1800000000-0x181bffffff]
[mem 0x1800000000-0x181bffffff] page 2M
init_memory_mapping: [mem 0x1000000000-0x17ffffffff]
[mem 0x1000000000-0x17ffffffff] page 1G
init_memory_mapping: [mem 0x00100000-0xdefa4fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xdedfffff] page 2M
[mem 0xdee00000-0xdefa4fff] page 4k
init_memory_mapping: [mem 0x100000000-0xfffffffff]
[mem 0x100000000-0xfffffffff] page 1G
RAMDISK: [mem 0x35da6000-0x36ecafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000E9010 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000DEFB88E8 000074 (v01 HPQOEM SLIC-WKS 20130715 00000000)
ACPI: FACP 0x00000000DEFB8A88 0000F4 (v03 HPQOEM TYLSBURG 00000001 00000000)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20140424/tbfadt-618)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20140424/tbfadt-618)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20140424/tbfadt-699)
ACPI: DSDT 0x00000000DEFB9457 00A9CE (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
ACPI: FACS 0x00000000DEFB8800 000040
ACPI: APIC 0x00000000DEFB8B7C 000194 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: ASF! 0x00000000DEFB8D10 000063 (v32 HPQOEM TYLSBURG 00000001 00000000)
ACPI: MCFG 0x00000000DEFB8D73 00003C (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: TCPA 0x00000000DEFB8DAF 000032 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: SLIC 0x00000000DEFB8DE1 000176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
ACPI: HPET 0x00000000DEFB8F57 000038 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: DMAR 0x00000000DEFB8F8F 0001B8 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: SRAT 0x00000000DEFB915F 0002F8 (v02 HPQOEM TYLSBURG 00000001 00000000)
ACPI: SSDT 0x00000000DEFC544F 004104 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x30 -> Node 1
SRAT: PXM 1 -> APIC 0x32 -> Node 1
SRAT: PXM 1 -> APIC 0x34 -> Node 1
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x31 -> Node 1
SRAT: PXM 1 -> APIC 0x33 -> Node 1
SRAT: PXM 1 -> APIC 0x35 -> Node 1
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x000e8000-0x6fffffff]
SRAT: Node 1 PXM 1 [mem 0x70000000-0xdfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0xc8fffffff]
SRAT: Node 1 PXM 1 [mem 0xc90000000-0x181fffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x000e8000-0x6fffffff] -> [mem 0x00000000-0x6fffffff]
Initmem setup node 0 [mem 0x00000000-0xc8fffffff]
NODE_DATA [mem 0xc8fffb000-0xc8fffffff]
Initmem setup node 1 [mem 0x70000000-0x181fffffff]
NODE_DATA [mem 0x181fff9000-0x181fffdfff]
[ffffea0001880000-ffffea00019fffff] potential offnode page_structs
[ffffea0000000000-ffffea00019fffff] PMD -> [ffff880c8e200000-ffff880c8fbfffff] on node 0
[ffffea0001a00000-ffffea00031fffff] PMD -> [ffff88181da00000-ffff88181f1fffff] on node 1
[ffffea002bf80000-ffffea002bffffff] potential offnode page_structs
[ffffea0003800000-ffffea002bffffff] PMD -> [ffff880c5fe00000-ffff880c885fffff] on node 0
[ffffea002c000000-ffffea00547fffff] PMD -> [ffff8817ef600000-ffff881817dfffff] on node 1
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x181fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00093fff]
node 0: [mem 0x00100000-0x6fffffff]
node 1: [mem 0x70000000-0xdefa4fff]
node 0: [mem 0x100000000-0xc8fffffff]
node 1: [mem 0xc90000000-0x181fffffff]
On node 0 totalpages: 12582803
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3987 pages, LIFO batch:0
DMA32 zone: 6216 pages used for memmap
DMA32 zone: 454656 pages, LIFO batch:31
Normal zone: 165760 pages used for memmap
Normal zone: 12124160 pages, LIFO batch:31
On node 1 totalpages: 12578725
DMA32 zone: 6215 pages used for memmap
DMA32 zone: 454565 pages, LIFO batch:31
Normal zone: 165760 pages used for memmap
Normal zone: 12124160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x31] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x35] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec20000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec20000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 32 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 88
PM: Registered nosave memory: [mem 0x00094000-0x00094fff]
PM: Registered nosave memory: [mem 0x00095000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
PM: Registered nosave memory: [mem 0xdefa5000-0xdefa5fff]
PM: Registered nosave memory: [mem 0xdefa6000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xffffffff]
e820: [mem 0xe0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 27 pages/cpu @ffff880c8fc00000 s80896 r8192 d21504 u131072
pcpu-alloc: s80896 r8192 d21504 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 12 13 14 15 16 17 24 26 28 30
pcpu-alloc: [1] 06 07 08 09 10 11 18 19 20 21 22 23 25 27 29 31
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 24817500
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 99168884K/100646112K available (5209K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 1477228K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=32.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS:33024 nr_irqs:1752 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3063.827 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6127.65 BogoMIPS (lpj=12255308)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
ftrace: allocating 21623 entries in 85 pages
dmar: Host address width 40
dmar: DRHD base: 0x000000fb100000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fb100000 ver 1:0 cap c90780106f0462 ecap f02076
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f02076
dmar: RMRR base: 0x000000defd0000 end: 0x000000defd0fff
dmar: RMRR base: 0x000000defd1000 end: 0x000000defd1fff
dmar: RMRR base: 0x000000defd2000 end: 0x000000defd2fff
dmar: RMRR base: 0x000000defd3000 end: 0x000000defd3fff
dmar: RMRR base: 0x000000defd4000 end: 0x000000defd4fff
dmar: RMRR base: 0x000000defd5000 end: 0x000000defd5fff
dmar: RMRR base: 0x000000defd6000 end: 0x000000defd6fff
dmar: RMRR base: 0x000000defd7000 end: 0x000000defd7fff
dmar: ATSR flags: 0x0
This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz (fam: 06, model: 2c, stepping: 02)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5
.... node #1, CPUs: #6 #7 #8 #9 #10 #11
.... node #0, CPUs: #12 #13 #14 #15 #16 #17
.... node #1, CPUs: #18 #19 #20 #21 #22 #23
x86: Booted up 2 nodes, 24 CPUs
smpboot: Total of 24 processors activated (147059.57 BogoMIPS)
devtmpfs: initialized
memory block size : 512MB
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [X0PR] (on)
ACPI: Power Resource [X1PR] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20140424/dsfield-211)
ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88181d436a90), AE_ALREADY_EXISTS (20140424/psparse-536)
acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x03af]; [io 0x0000-0x03af] ignored
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfaffffff]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff]
pci_bus 0000:00: root bus resource [io 0x1000-0xdfff]
pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xc000-0xc01f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xc020-0xc03f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xc040-0xc05f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf9004800-0xf9004bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf9000000-0xf9003fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xc060-0xc07f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xc080-0xc09f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xc0a0-0xc0bf]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf9004c00-0xf9004fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0xf800-0xf87f]: no compatible bridge window
pci 0000:00:1f.0: can't claim BAR 14 [io 0xfa00-0xfa3f]: no compatible bridge window
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0xc100-0xc107]
pci 0000:00:1f.2: reg 0x14: [io 0xc110-0xc113]
pci 0000:00:1f.2: reg 0x18: [io 0xc108-0xc10f]
pci 0000:00:1f.2: reg 0x1c: [io 0xc114-0xc117]
pci 0000:00:1f.2: reg 0x20: [io 0xc0c0-0xc0df]
pci 0000:00:1f.2: reg 0x24: [mem 0xf9004000-0xf90047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:0f:00.0: [10de:0dd8] type 00 class 0x030000
pci 0000:0f:00.0: reg 0x10: [mem 0xec000000-0xedffffff]
pci 0000:0f:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:0f:00.0: reg 0x1c: [mem 0xe8000000-0xebffffff 64bit pref]
pci 0000:0f:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:0f:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:0f:00.1: [10de:0be9] type 00 class 0x040300
pci 0000:0f:00.1: reg 0x10: [mem 0xee000000-0xee003fff]
pci 0000:00:03.0: PCI bridge to [bus 0f]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xec000000-0xee0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 28]
pci 0000:00:1c.0: PCI bridge to [bus 1c]
pci 0000:02:00.0: [14e4:1684] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xf8000000-0xf800ffff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:01:00.0: [14e4:1684] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xef000000-0xef00ffff 64bit]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 01]
pci 0000:00:1c.5: bridge window [mem 0xef000000-0xef0fffff]
pci 0000:37:09.0: [11c1:5811] type 00 class 0x0c0010
pci 0000:37:09.0: reg 0x10: [mem 0xfa000000-0xfa000fff]
pci 0000:37:09.0: supports D1 D2
pci 0000:37:09.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 37] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfa0fffff]
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xefffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfaffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed003ff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0xdfff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 40-7b])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:40
pci_bus 0000:40: root bus resource [bus 40-7b]
pci_bus 0000:40: root bus resource [mem 0xfb000000-0xfbffffff]
pci_bus 0000:40: root bus resource [io 0xe000-0xefff]
pci 0000:40:03.0: [8086:340a] type 01 class 0x060400
pci 0000:40:03.0: PME# supported from D0 D3hot D3cold
pci 0000:40:03.0: System wakeup disabled by ACPI
pci 0000:40:07.0: [8086:340e] type 01 class 0x060400
pci 0000:40:07.0: PME# supported from D0 D3hot D3cold
pci 0000:40:07.0: System wakeup disabled by ACPI
pci 0000:40:09.0: [8086:3410] type 01 class 0x060400
pci 0000:40:09.0: PME# supported from D0 D3hot D3cold
pci 0000:40:10.0: [8086:3425] type 00 class 0x080000
pci 0000:40:10.1: [8086:3426] type 00 class 0x080000
pci 0000:40:11.0: [8086:3427] type 00 class 0x080000
pci 0000:40:11.1: [8086:3428] type 00 class 0x080000
pci 0000:40:14.0: [8086:342e] type 00 class 0x080000
pci 0000:40:14.1: [8086:3422] type 00 class 0x080000
pci 0000:40:14.2: [8086:3423] type 00 class 0x080000
pci 0000:40:15.0: [8086:342f] type 00 class 0x080020
pci 0000:40:03.0: PCI bridge to [bus 42]
pci 0000:40:07.0: PCI bridge to [bus 60]
pci 0000:41:00.0: [1000:0058] type 00 class 0x010000
pci 0000:41:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:41:00.0: reg 0x14: [mem 0xfb010000-0xfb013fff 64bit]
pci 0000:41:00.0: reg 0x1c: [mem 0xfb000000-0xfb00ffff 64bit]
pci 0000:41:00.0: reg 0x30: [mem 0x00000000-0x001fffff pref]
pci 0000:41:00.0: supports D1 D2
pci 0000:40:09.0: PCI bridge to [bus 41]
pci 0000:40:09.0: bridge window [io 0xe000-0xefff]
pci 0000:40:09.0: bridge window [mem 0xfb000000-0xfb0fffff]
ACPI: PCI Root Bridge [NHL1] (domain 0000 [bus 7f])
acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:02: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
pci 0000:7f:00.0: [8086:2c70] type 00 class 0x060000
pci 0000:7f:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:7f:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:7f:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:7f:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:7f:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:7f:02.4: [8086:2d94] type 00 class 0x060000
pci 0000:7f:02.5: [8086:2d95] type 00 class 0x060000
pci 0000:7f:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:7f:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:7f:03.2: [8086:2d9a] type 00 class 0x060000
pci 0000:7f:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:7f:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:7f:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:7f:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:7f:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:7f:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:7f:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:7f:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:7f:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:7f:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:7f:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:7f:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:7f:06.3: [8086:2db3] type 00 class 0x060000
ACPI: PCI Root Bridge [NHL2] (domain 0000 [bus 7e])
acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:03: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:7e
pci_bus 0000:7e: root bus resource [bus 7e]
pci 0000:7e:00.0: [8086:2c70] type 00 class 0x060000
pci 0000:7e:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:7e:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:7e:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:7e:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:7e:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:7e:02.4: [8086:2d94] type 00 class 0x060000
pci 0000:7e:02.5: [8086:2d95] type 00 class 0x060000
pci 0000:7e:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:7e:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:7e:03.2: [8086:2d9a] type 00 class 0x060000
pci 0000:7e:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:7e:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:7e:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:7e:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:7e:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:7e:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:7e:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:7e:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:7e:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:7e:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:7e:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:7e:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:7e:06.3: [8086:2db3] type 00 class 0x060000
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:0f:00.0
vgaarb: device added: PCI:0000:0f:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0f:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00094800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdefa5800-0xdfffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:06: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:06: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:06: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
system 00:06: [io 0x0400-0x041f] has been reserved
system 00:06: [io 0x0420-0x043f] has been reserved
system 00:06: [io 0x0440-0x045f] has been reserved
system 00:06: [io 0x0460-0x047f] has been reserved
system 00:06: [io 0x0480-0x048f] has been reserved
system 00:06: [io 0xfa00-0xfa3f] has been reserved
system 00:06: [io 0xfc00-0xfc7f] has been reserved
system 00:06: [io 0xfc80-0xfcff] has been reserved
system 00:06: [io 0xfe00-0xfe7f] has been reserved
system 00:06: [io 0xfe80-0xfeff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x4700-0x470b] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfb100000-0xfb101fff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:41:00.0 BAR 6 [mem 0x00000000-0x001fffff pref]
pnp 00:09: disabling [mem 0x00100000-0xdfffffff] because it overlaps 0000:41:00.0 BAR 6 [mem 0x00000000-0x001fffff pref]
pnp 00:09: disabling [mem 0x000e8000-0x000fffff] because it overlaps 0000:41:00.0 BAR 6 [mem 0x00000000-0x001fffff pref]
pnp 00:09: disabling [mem 0x000dc400-0x000e7fff] because it overlaps 0000:41:00.0 BAR 6 [mem 0x00000000-0x001fffff pref]
system 00:09: [mem 0xfec01000-0xfecfffff] could not be reserved
system 00:09: [mem 0xfed00000-0xfed3ffff] could not be reserved
system 00:09: [mem 0xfed40000-0xffffffff] could not be reserved
system 00:09: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 1c] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 1c] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 1c] add_size 200000
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0xf800-0xf87f] has bogus alignment
pci 0000:00:1f.0: BAR 14: [io 0xfa00-0xfa3f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xee100000-0xee2fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xee300000-0xee4fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xee500000-0xee6fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xee700000-0xee8fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.5: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:0f:00.0: BAR 6: assigned [mem 0xee080000-0xee0fffff pref]
pci 0000:00:03.0: PCI bridge to [bus 0f]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xec000000-0xee0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 28]
pci 0000:00:1c.0: PCI bridge to [bus 1c]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xee100000-0xee2fffff]
pci 0000:00:1c.0: bridge window [mem 0xee300000-0xee4fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:1c.4: bridge window [mem 0xee500000-0xee6fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 01]
pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.5: bridge window [mem 0xef000000-0xef0fffff]
pci 0000:00:1c.5: bridge window [mem 0xee700000-0xee8fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 37]
pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfa0fffff]
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 5 [mem 0xe0000000-0xefffffff]
pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfaffffff]
pci_bus 0000:00: resource 7 [mem 0xfed00000-0xfed003ff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [io 0x0000-0x03af]
pci_bus 0000:00: resource 10 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 11 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 12 [io 0x0d00-0x0fff]
pci_bus 0000:00: resource 13 [io 0x1000-0xdfff]
pci_bus 0000:0f: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0f: resource 1 [mem 0xec000000-0xee0fffff]
pci_bus 0000:0f: resource 2 [mem 0xe0000000-0xebffffff 64bit pref]
pci_bus 0000:1c: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:1c: resource 1 [mem 0xee100000-0xee2fffff]
pci_bus 0000:1c: resource 2 [mem 0xee300000-0xee4fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf80fffff]
pci_bus 0000:02: resource 2 [mem 0xee500000-0xee6fffff 64bit pref]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xef000000-0xef0fffff]
pci_bus 0000:01: resource 2 [mem 0xee700000-0xee8fffff 64bit pref]
pci_bus 0000:37: resource 1 [mem 0xfa000000-0xfa0fffff]
pci_bus 0000:37: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:37: resource 5 [mem 0xe0000000-0xefffffff]
pci_bus 0000:37: resource 6 [mem 0xf8000000-0xfaffffff]
pci_bus 0000:37: resource 7 [mem 0xfed00000-0xfed003ff]
pci_bus 0000:37: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:37: resource 9 [io 0x0000-0x03af]
pci_bus 0000:37: resource 10 [io 0x03b0-0x03df]
pci_bus 0000:37: resource 11 [io 0x03e0-0x0cf7]
pci_bus 0000:37: resource 12 [io 0x0d00-0x0fff]
pci_bus 0000:37: resource 13 [io 0x1000-0xdfff]
pci 0000:40:03.0: PCI bridge to [bus 42]
pci 0000:40:07.0: PCI bridge to [bus 60]
pci 0000:41:00.0: BAR 6: can't assign mem pref (size 0x200000)
pci 0000:40:09.0: PCI bridge to [bus 41]
pci 0000:40:09.0: bridge window [io 0xe000-0xefff]
pci 0000:40:09.0: bridge window [mem 0xfb000000-0xfb0fffff]
pci_bus 0000:40: resource 4 [mem 0xfb000000-0xfbffffff]
pci_bus 0000:40: resource 5 [io 0xe000-0xefff]
pci_bus 0000:41: resource 0 [io 0xe000-0xefff]
pci_bus 0000:41: resource 1 [mem 0xfb000000-0xfb0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
pci 0000:0f:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17556K (ffff880035da6000 - ffff880036ecb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdafa5000-0xdefa5000] (64MB) mapped at [ffff8800dafa5000-ffff8800defa4fff]
microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU12 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU13 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU14 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU15 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU16 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU17 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU18 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU19 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU20 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU21 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU22 sig=0x206c2, pf=0x1, revision=0x1a
microcode: CPU23 sig=0x206c2, pf=0x1, revision=0x1a
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 8192 (order: 7, 524288 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1437846773.052:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 88 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 89 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 90 for MSI/MSI-X
ioapic: probe of 0000:00:15.0 failed with error -22
ioapic: probe of 0000:40:15.0 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:00: setting system clock to 2015-07-25 17:52:54 UTC (1437846774)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
systemd-udevd[178]: starting version 215
random: systemd-udevd urandom read with 2 bits of entropy available
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
SCSI subsystem initialized
tg3.c:v3.137 (May 11, 2014)
Fusion MPT base driver 3.04.20
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Copyright (c) 1999-2008 LSI Corporation
libata version 3.00 loaded.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
uhci_hcd: USB Universal Host Controller Interface driver
Fusion MPT SAS Host driver 3.04.20
mptbase: ioc0: Initiating bringup
FDC 0 is a post-1991 82077
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 22, io mem 0xf9004800
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0xf9004c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: irq 91 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pmp pio slum part ccc sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf9004000 port 0xf9004100 irq 91
ata2: SATA max UDMA/133 abar m2048@0xf9004000 port 0xf9004180 irq 91
ata3: SATA max UDMA/133 abar m2048@0xf9004000 port 0xf9004200 irq 91
ata4: SATA max UDMA/133 abar m2048@0xf9004000 port 0xf9004280 irq 91
ata5: SATA max UDMA/133 abar m2048@0xf9004000 port 0xf9004300 irq 91
ata6: SATA max UDMA/133 abar m2048@0xf9004000 port 0xf9004380 irq 91
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 20, io base 0x0000c000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c020
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000c040
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000c060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000c080
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000c0a0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95754) rev 5784100] (PCI Express) MAC address 1c:c1:de:33:c1:4b
tg3 0000:02:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
firewire_ohci 0000:37:09.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
tg3 0000:01:00.0 eth1: Tigon3 [partno(BCM95754) rev 5784100] (PCI Express) MAC address 1c:c1:de:33:c1:4a
tg3 0000:01:00.0 eth1: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:01:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:01:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATAPI: hp DVD-RAM GH60L, RD01, max UDMA/100
ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01109, max UDMA7
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
ata2.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 0:0:0:0: CD-ROM hp DVD-RAM GH60L RD01 PQ: 0 ANSI: 5
firewire_core 0000:37:09.0: created device fw0: GUID 0060b0000027ceaa, S400
scsi 1:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1109 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sdb: sdb1 sdb2 sdb3 sdb4
sdb: partition table partially beyond EOD, enabling native capacity
sdb: sdb1 sdb2 sdb3 sdb4
sdb: partition table partially beyond EOD, truncated
sdb: p3 size 3665245815 extends beyond EOD, truncated
sdb: p4 start 3899699200 is beyond EOD, truncated
sd 2:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ioc0: LSISAS1068E B3: Capabilities={Initiator}
usb 7-2: new low-speed USB device number 2 using uhci_hcd
tsc: Refined TSC clocksource calibration: 3063.656 MHz
usb 7-2: New USB device found, idVendor=045e, idProduct=00db
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: Natural® Ergonomic Keyboard 4000
usb 7-2: Manufacturer: Microsoft
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/0003:045E:00DB.0001/input/input2
microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.1-2/input0
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/0003:045E:00DB.0002/input/input3
microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.1-2/input1
usb 8-1: new low-speed USB device number 2 using uhci_hcd
usb 8-1: New USB device found, idVendor=045e, idProduct=0039
usb 8-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 8-1: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
usb 8-1: Manufacturer: Microsoft
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/0003:045E:0039.0003/input/input4
hid-generic 0003:045E:0039.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-1/input0
Switched to clocksource tsc
scsi6 : ioc0: LSISAS1068E B3, FwRev=01190300h, Ports=1, MaxQ=266, IRQ=56
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x756d500397b2d095
scsi 6:0:0:0: Direct-Access ATA SanDisk SDSSDH12 13F0 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 73 00 00 08
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
random: nonblocking pool is initialized
sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: [/etc/systemd/system.conf:20] Unknown lvalue 'MountAuto' in section 'Manager'
systemd[1]: [/etc/systemd/system.conf:21] Unknown lvalue 'SwapAuto' in section 'Manager'
systemd[1]: systemd 221 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd-fstab-generator[419]: Ignoring "noauto" for root device
systemd[1]: dm-event.socket: Cannot add dependency job, ignoring: Unit dm-event.socket is masked.
systemd[1]: lm-sensors.service: Cannot add dependency job, ignoring: Unit lm-sensors.service is masked.
systemd[1]: anacron.service: Cannot add dependency job, ignoring: Unit anacron.service is masked.
systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Starting User and Group Name Lookups.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Started Early root shell on /dev/tty9 FOR DEBUGGING ONLY.
systemd[1]: Starting Early root shell on /dev/tty9 FOR DEBUGGING ONLY...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Mounting Debug File System...
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting fsck to fsckd communication Socket.
systemd[1]: Started File System Check on Root Device.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
lp: driver loaded but no devices found
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Mounted Debug File System.
ppdev: user-space parallel port driver
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Nameserver information manager.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
loop: module loaded
systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
systemd[1]: Failed to start Load Kernel Modules.
systemd[1]: systemd-modules-load.service: Unit entered failed state.
systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting LSB: Set preliminary keymap...
systemd[1]: Starting LSB: Tune IDE hard disks...
systemd[1]: Starting Copy rules generated while the root was ro...
systemd[1]: Started Copy rules generated while the root was ro.
systemd[1]: Started Journal Service.
EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro,discard,commit=86400
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
wmi: Mapper loaded
EDAC MC: Ver: 3.0.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input7
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:7f:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:7f:03.0 (POLLED)
EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:7e:03.0 (POLLED)
EDAC PCI1: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:7e:03.0 (POLLED)
EDAC i7core: Driver loaded, 2 memory controller(s) found.
snd_hda_intel 0000:00:1b.0: irq 92 for MSI/MSI-X
snd_hda_intel 0000:0f:00.1: Disabling MSI
snd_hda_intel 0000:0f:00.1: Handle VGA-switcheroo audio client
SSE version of gcm_enc/dec engaged.
iTCO_vendor_support: vendor-support=0
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
sound hdaudioC0D0: ALC262: SKU not ready 0x411111f0
sound hdaudioC0D0: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
alg: No test for crc32 (crc32-pclmul)
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
input: HP WMI hotkeys as /devices/virtual/input/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input19
EXT4-fs (dm-3): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
systemd-journald[464]: Received request to flush runtime journal from PID 1
nbd: registered device at major 43
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff818b9d00)
tg3 0000:02:00.0: irq 93 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready
tg3 0000:01:00.0: irq 94 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth8: link is not ready
tg3 0000:02:00.0 eth7: Link is up at 100 Mbps, full duplex
tg3 0000:02:00.0 eth7: Flow control is on for TX and on for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth7: link becomes ready
EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro,discard,commit=86400
[drm] Initialized drm 1.1.0 20060810
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:0f:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:0f:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.76 Thu Jan 22 12:11:08 PST 2015
nvidia 0000:0f:00.0: irq 95 for MSI/MSI-X
fuse init (API version 7.23)
INFO: NMI handler (arch_trigger_all_cpu_backtrace_handler) took too long to run: 1.763 msecs
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.553 msecs
perf interrupt took too long (12566 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (12488 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
perf interrupt took too long (12410 > 10000), lowering kernel.perf_event_max_sample_rate to 12500